EFFECT OF TECHNOLOGY CHANGES IN RELATION BETWEEN LEAN PRODUCTION AND PERFORMANCE OF PRODUCTIVE INSTITUTION OF GUILAN PROVINCE

  • Somayyeh Nikzad Institución Universitaria Salazar y Herrera
  • Seyed Mozaffar Mirbargkar Islamic Azad University

Resumen

Productive industries are the most prevalent industries at 21 century. Any economy can’t continue its life without productive industries. Therefore assessing institutions is the most important subject paid attention by investors, creditors, managers and governments. In this direction the main goal of this research is considering the effect of technology changes in relation with lean production and performance of productive institutions in Guilan province. Method of data collection is correlation and statistical society of research is all companies activating at industrial cities of Guilan province. Method of sampling is available improbable sampling method. Studying number includes 209 productive institutions. After data collection through standard questionnaires, for assessing relation between variables structural equation modeling techniques with partial least square approach has been used and generally all data analysis has been done through SPSS and PLS. result of hypothesis of research denotes positive effect of cooperation with supplier and management of relation with customer on performance of lean production of institution. Positive effect of performance of lean production on financial and non-financial performance of institution was approved. Also modifying role of technology changes in relation between performance of lean production and financial performance of institution was approved. Also modification of technology changes in relation between performance of lean production and non-financial performance of institution was approved.

Efecto de los cambios tecnológicos en relación a la producción y el desempeño de las instituciones productivas en la provincia de Guilan

Resumen:

Las industrias productivas son las industrias más prevalentes en el siglo XXI. Es claro que las diferentes economías no pueden funcionar sin industrias productivas; por lo tanto, la evaluación de las instituciones es un tema  importante al que los inversionistas, acreedores, administradores y gobiernos deben prestar atención. En esta dirección, el objetivo principal de esta investigación es considerar el efecto de los cambios tecnológicos en relación con la producción y el desempeño de las instituciones productivas en la provincia de Guilan. El método de recolección de datos usado fue la correlación en todas las empresas industriales de la provincia de Guilan. El número de estudio incluye 209 instituciones productivas. Después de la recopilación de datos a través de cuestionarios estándar, se realizó el análisis de todos los datos a través de SPSS y PLS. El resultado de la hipótesis de investigación denota el efecto positivo de la cooperación con el proveedor y la gestión de la relación con el cliente en el desempeño de la producción ajustada de la institución. Se verificó el efecto positivo del desempeño de la producción ajustada en los aspectos financieros y no financieros de la institución. También se demostró la hipótesis sobre la modificación de la función de los cambios tecnológicos en relación con el desempeño de la producción ajustada y el desempeño financiero de la institución.

Citas

Aksoy, A., Ozturk, N. (2011). Supplier selection and performance evaluation in just-in-time production environments, Expert systems with applications, Vol. 38, pp. 6351-6359.

Al-Tally, H. A. (2014). An Investigation of the Effect of Financial Leverage on Firm Financial Performance in Saudi Arabia`s Public Listed Companies, Victoria University, Melbourne, Austraia, pp.1-219.

Altuntas, G., Semercioz, F., Mert, M., Pehlivan, c. (2014). Industry forces, competitive and functional strategies and organizational performance: Evidence from restaurants in Istanbul, Turkey, Procedia - Social and Behavioral Sciences, Vol. 150, pp. 300-309.

Azevedo, S. G., Carvalho, H., & Machado, V. C. (2012). The Influence of Green Practices on Supply Chain Performance: A Case Study Approach. Transportation Research Part, Vol. 47, pp. 850-871.

Bazazzadeh, H. (2014). Decision of managers based on non-financial criteria of assessing performance in condition of environmental uncertainty. Management research in Iran, period 18, No 4, p 1-22.

Bhatti, M. I., Awan, H. M.., & Razaq, Z. (2014). The key performance indicators (KPIs) and their impact on overall organizational performance, Qual Quant, Vol. 48, pp. 3127–3143.

Campo, S., Díaz, A., & Yagüe, M. (2014). Market orientation in mid-range service, urban hotels: How to apply the MKTOR instrument. International Journal of Hospitality Management, Vol. 43, pp. 76-86.

Chavez, R., Yu, W., Jacobs, M., Fynes, B., Wiengarten, F., & Lecuna, A. (2014). Internal lean practices and performance: The role of technological turbulence. Int. J. Production Economics, pp. 1-15.

Chen, X., & Wu, J. (2011). Do different guanxi types affect capability building differently? A contingency view. Industrial Marketing Management, Vol. 40, pp. 581-592.

Darzian Azizi, A., Bavarsad, B., Rahimi, F., Ghasemi, N. (2014). Thesis for getting M.A degree at shahid chamran university of Ahvaz, faculty of economy and social science.

Feizi, A., Solokdar, A. (2014). Assessing performance of banking industry with combined approach of balanced coring card of (FTOPSIS-BSC). Financial and management engineering journal of stocks, No 20, p 57-78.

Giro Moori, R., Pescarmona, A., & Kimura, H. (2013). Lean Manufacturing and Business Performance in Brazilian Firms, Journal of Operations and Supply Chain Management, Vol. 6, No. 1, pp. 91-105.

Granstrom, K. (2010). The Relationship between Lean Manufacturing and Firm Performance – A Study of Manufacturing Companies in Sweden, Master of Business Administration December, pp. 1-51

Jafarnezhad, A., Ahmadi, A., Maleki, M. H. (2011). Assessment of MAP by using combined approach of techniques of ANP, DEMATEL in fasic condition. Scientific-research quarterly of industrial management studies, year 8, No 20, p 1-25.

Karaye, Y-I., Ishak, Z., & Che-Adam, N. (2014). The mediating effect of stakeholder influence capacity on the relationship between corporate social responsibility and corporate financial performance. Social and Behavioral Sciences, Vol. 164, pp. 528 – 534.

Khanleri, A., Sabzeh ali, R. (2014). Considering relation of organizational learning and financial performance through innovation process at industrial companies of Golpaigan, business management, year 6, No 4, p 773-790.

Kordestani, G., Hadilou, A. A. (2011). Realtion between degree of investment at information technology and financial performance of companies. Financial accounting and auditing research leter, year 3, No 10, p 163-187.

Kordnaeej, A., Fani, A., Masoudi, Z. (2014). Organizational culture of the cycle of organizational clarity and performance of an organization. Organizational culture management, No 12, Vol 2, p 173-189.

Koredestani, G., Abasi, A. (2014). Considering effect of customer on financial performance of a company. Scientific research quarterly of management of asest management and financial supply, second year, No 3, p 81-92.

Lee, M-S., , Y-H., & Memon Mari, S-I. (2015). Group Multi-Criteria Supplier Selection Using Combined Grey Systems Theory and Uncertainty Theory, Expert Systems with Applications, 42(21), 7951-7959.

Lehmann, D., Zahay, D., Peltier, J. (2013). Survey analyze customer relationship management using balanced scorecard. Journal of Interactive Marketing, Vol. 27, pp. 1-16.

Lu, W., Chau, K.W., Wang, H. & Pan, W. (2015). A decade's debate on the nexus between corporate social and corporate financial performance: a critical review of empirical studies 2002-2011, Journal of Cleaner Production, Vol.79, pp. 195-206.

Mohajer Tabrizi, M., Bashiri, M., Navidi, H. (2009). Coordination of producer and retailer at a sully chain by using tools of pricing and reducing tile of reviewing order at the presence of saving managemrnt system, Thesis for getting M. A degree at Shahed University, technical and engineering faculty.

Mohammed Abdul Alem, R-B-b. (2011). "Customer Relationship Management (CRM) in Hotel Industry: A framework Proposal on the Relationship among CRM Dimensions, Journal of Operations Management, 29, 3-16.

Mohd Rohani, J., & Zahraee, M. (2015). Production line analysis via value stream mapping: a lean manufacturing process of color industry, Procedia Manufacturing, Vol. 2, pp. 6-10.

Nawanir, G., Teong, L-K., & Othman, S-N. (2013). Impact of lean practices on operations performance and business performance: Some evidence from Indonesian manufacturing companies, Journal of Manufacturing Technology Management, 24, 7, 1019-1050.

Nemati, N., Tarokh, J., Esmaeilian, G. (2014). Development of mathematic model at condition of lack of certaininty for choosing supliers (Case study: pharmaceutical section of Shariati hospital). Thesis for getting M.A degree at Payam e Noor university of Tehran center, industry faculty.

Roghanian, P., Rasli, A., & Gheysari, H. (2012). Productivity Through Effectiveness and Efficiency in the Banking Industry", Procedia Science & Medicine, 40, pp. 550-556.

Seyyedhoseini, S. M., Baayt tork, A. (2012). Assessing factors of MAP at inconsistent productive organizations (ordering) (case study: industrial group of Sadid). Human science teacher quarterly, period 9, No 2, p 59-86.

Terawatanavong, C., Whitwell, G., Widing, R., & O'Cass, A. (2011). Technological turbulence, supplier market orientation, and buyer satisfaction. Journal of Business Research, 64, 911-918.

Torabi, M., Mehrmanesh, H., Aslizadeh, A. (2015). Considering role of parameters of electronic trade on supply chain manageemn in Iran khodro. Thesis for getting M.A degree at Islamic Azad university of Tehran markazi unit, faculty of management and accounting.

Yazdanpanah, A., Soltani, O. (2014). Identifying and analyzing strategic planning relation, capability of flexibility and performance of univerisites and institutions of higher education, case research: shahid Beheshti University. Research and planning quarterly at higher education, period 2, No 3, p 67-93.

Yazdanpanh, A. (2013). Considering relation of multiple flexibility on performance of organization at the process of strategic planning of organizations. The tenth international conference of strategic management.

Yıldız, S., Basturk, F., & Tastan, B-I. (2014). The Effect of Leadership & Innovativeness on Business Performance", Social and Behavioral Sciences, Vol.150, pp. 785 – 793.

Zanjirchi, S. M., Tahmores, R. (2010). Assessing performance of production with lean approach by suing data envelop analysis. Thesis for getting M.A degree at Islamic Azad university of Shiraz, faculty of accounting and management.

Publicado
2018-06-20
Sección
ARTÍCULOS DE INVESTIGACIÓN